Please read and understand M-Pump manual, it contains the information needed for the correct installation, use and maintenance of your M-Pump. This manual must be kept with, and supplied with the pump at all times. Failure to comply with the recommendations stated in this manual can cause serious injury, damage the pump and void factory warranty. Few Key points for pre-installation check list
Pre Installation Checklist:
- 1 Verify pump model received against purchase order or spec sheet.
- 2 Re-torque all bolts to specification on torque table
- 3 Pumps that need to submersed must have both Wetted and Non-Wetted Parts compatible with material being pumped and the air exhaust must above the liquid level.
- 4 Blow air line for 10 seconds before attaching to pump to make sure all pipe line debris is clear and do not exceed 125 psig air supply pressure.